SFP+, BiDi WDM, 1270nm TX/1330nm RX, LR SMF 10km, 10G, DOM, C-Temp/I-Temp
Generic 10G SFP+ BIDI TX1270/RX1330nm 10km
The OLSBxx1XL-C(I)D10 features a highly reliable 1270nm DFB transmitter and 1330nm PIN photo-detector into LC Simplex optical connector, that provides 10 km link distance over single-strand single mode fiber.
Product Features
• Electrical interface compliant to SFF-8431
• Compliant with SFF-8472
• 1 0Gb/s serial optical interface compliant to 802.3ae
• Distance up to 10km on single mode fiber
• Built-in digital diagnostic functions
• Single 3.3V power supply
• Metal enclosure, for lower EMI
• ROHS compliant and lead-free
Absolute Maximum Ratings
| Parameter | Symbol | Min. | Max. | Unit | Note |
| Supply Voltage | Vcc | -0.5 | 4.0 | V | |
| Storage Temperature | TS | -40 | 85 | °C | |
| Relative Humidity | RH | 0 | 85 | % | |
Note: Stress in excess of the maximum absolute ratings can cause permanent damage to the transceiver.
General Operating Characteristics
| Parameter | Symbol | Min. | Typ | Max. | Unit | Note |
| Data Rate | DR | 9.95 | 10.3125 | 11.3 | Gb/s | |
| Supply Voltage | Vcc | 3.13 | 3.3 | 3.47 | V | |
| Supply Current | Icc5 | | | 400 | mA | |
| Operating Case Temp. | Tc | 0 | | 70 | °C | |
| TI | -40 | | 85 | |
Optical Characteristics (TOP(C) = 0 to 70 ℃, TOP(I) =-40 to 85 ℃,VCC = 3.13 to 3.47 V)
| Parameter | Symbol | Min. | Typ | Max. | Unit | Note |
| Transmitter |
| Operating Wavelength | λ | 1250 | 1270 | 1290 | nm | |
| 1310 | 1330 | 1350 | |
| Ave. output power (Enabled) | PAVE | -6 | | 0 | dBm | 1 |
| Side-Mode Suppression Ratio | SMSR | 30 | | | dB | |
| Extinction Ratio | ER | 4 | 4.5 | | dB | |
| RMS spectral width | Δλ | | | 1 | nm | |
| Rise/Fall time (20%~80%) | Tr/Tf | | | 50 | ps | |
| Dispersion penalty | TDP | | | 3.2 | dB | |
| Relative Intensity Noise | RIN | | | -128 | dB/Hz | |
| Output Optical Eye | Compliant with IEEE 0802.3ae |
| Receiver |
| Operating Wavelength | λ | | 1330 | | nm | |
| | 1270 | | |
| Receiver Sensitivity(ER=4.5) | PSEN1 | | | -12.6 | dBm | 2 |
| Receiver Sensitivity(ER=6) | PSEN2 | | | -14.4 | dBm | 2 |
| Average Receive Power | PAVE | | | 0.5 | dBm | |
| Receiver Reflectance | Rrx | | | -12 | dB | |
| LOS Assert | Pa | -30 | | | dBm | |
| LOS De-assert | Pd | | | -17 | dBm | |
| LOS Hysteresis | Pd-Pa | 0.5 | | | dB | |
Notes:
1. Average power figures are informative only, per IEEE 802.3ae.
2. Measured with worst ER; BER<10-12; 231 – 1 PRBS.
This module is programmed to works with a wide range of equipment such as 10 Gigabit Ethernet (10 GbE) Switches, Routers, Network Interface Cards (NICs) and Media Converters
Product Tags:
|
|
10km BiDi WDM 1270nmTX / 1330nmRX 10G SFP+ Optical Transceiver Images
|
