850nm 300m 10G SFP+ Fiber Transceiver
ZyXEL SFP10G-SR Compatible 10GBASE-SR SFP+ 850nm 300m Transceiver
The OLSP851XL-C(I)DS3 is a 10G SR multi-mode multi-rate SFP+ transceiver using 850nm wavelength and reaching up to 300m distance on 50/125um fiber. The module can be used for 10G Ethernet, SONET or SDH networks.
Product Features
1. Optical interface compliant to IEEE 802.3ae 10GBASE-SR
2. Electrical interface compliant to SFF-8431
3. Hot Pluggable
4. 850nm VCSEL transmitter, PIN photo-detector
5. Maximum link length of 300m on 2000MHz/km MMF
6. Operating case temperature: 0 to 70℃
7. Low power consumption
Absolute Maximum Ratings
| Parameter |
Symbol |
Min. |
Max. |
Unit |
Note |
| Supply Voltage |
Vcc |
-0.5 |
4.0 |
V |
|
| Storage Temperature |
TS |
-40 |
85 |
°C |
|
| Relative Humidity |
RH |
0 |
85 |
% |
|
Note: Stress in excess of the maximum absolute ratings can cause permanent damage to the transceiver.
General Operating Characteristics
| Parameter |
Symbol |
Min. |
Typ |
Max. |
Unit |
Note |
| Data Rate |
DR |
9.953 |
10.3125 |
10.518 |
Gb/s |
|
| Supply Voltage |
Vcc |
3.13 |
3.3 |
3.47 |
V |
|
| Supply Current |
Icc5 |
|
|
280 |
mA |
|
| Operating Case Temp. |
Tc |
0 |
|
70 |
°C |
|
| TI |
-40 |
|
85 |
|
Digital Diagnostic Specifications
The OLSP851XL-C(I)DS3 transceivers can be used in host systems that require either internally or externally calibrated digital diagnostics.
| Parameter |
Symbol |
Units |
Min. |
Max. |
Accuracy |
Note |
| Transceiver temperature |
DTemp-E |
ºC |
-45 |
+90 |
±5ºC |
1 |
| Transceiver supply voltage |
DVoltage |
V |
2.8 |
4.0 |
±3% |
|
| Transmitter bias current |
DBias |
mA |
0 |
80 |
±10% |
2 |
| Transmitter output power |
DTx-Power |
dBm |
-8 |
+1 |
±2dB |
|
| Receiver average input power |
DRx-Power |
dBm |
-13 |
0 |
±2dB |
|
Notes:
1. Internally measured
2. The accuracy of the Tx bias current is 10% of the actual current from the laser driver to the laser
Applications
• 10GBASE-SR at 10.3125Gbps
• 10GBASE-SW at 9.953Gbps
• Other optical links
Compatibility
• XS3700-24
• XGS3700-24
• XGS3700-24HP
• XGS3700-48
• XGS3700-48HP
• ZyXEL Switch 3900 Series
OLSP851XL-C(I)DS3 are certified 100% compliant in all OEM applications. They are pre-configured with an application specific code to meet the requirement set forth by the router and switch OEMs. Olinkcom's compatible transceivers perform, fit and function identically when compared to “Original” Transceivers. Our transceivers fully comply with the multi-sourcing agreement (MSA) which enables them to work in all MSA compliant platforms.
Product Tags:
|
|
850nm 300m 10G SFP+ Fiber Transceiver Images
|
